Everyday someone brings in their Watch because their
Watch is set wrong! People get frustrated and don't know how to change it. Either
the Date changes at Noon instead of Midnight, or the Day is off, or the
Language is in Spanish! (Like in the picture, Lun, short for Lunes, is Spanish for Monday. Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday are: Martes, Miercoles, Jueves, Viernes, Sabado and Domingo! So if you see those, you're seeing
Spanish!)
The good thing is, changing the Date and setting the Day is much easier than you may think. All it takes is a couple of pulls and a couple of twists and you'll be good to go!
The Stem of your Watch is that little ridged knob on the side of your Watch Face. If you pull the Stem out all the way, you can spin it and it will spin the Minute Hands and Hour Hands so you can set the Time on your Watch. Most people already know this...
So if you know that much, you're on the right track. The funny thing is: You pulled too hard! You see, on Watches that have a Day and a Date, the Stem has a dual purpose. It controls the settings!
So to change the Day and Date of your Watch, slowly pull the Stem out... (Do note that if you have a Waterproof Watch, you'll need to unscrew the Stem counter-clockwise, which is towards you, until it unlocks, then you can pull the Stem out!) But this is where you need to go slow. If you pull it out slowly you should hear one snap. (It stops on the first notch) If you pull the Stem out all the way, it snaps twice and ends up on the second notch. (See picture below) The second notch, or all the way out, is where the Stem needs to be to set the Time.
But the first notch, or first snap, is the secret and the key to setting the Day and Date! In the first notch position, you'll see that if you spin the Crown one way, it will change the Day. Spin it in the opposite direction and it changes the Date!
Do keep in mind that you may have to spin the Day and Date a couple rotations because it most likely will alternate between English and Spanish. Just pick the correct Language for you and it's done! When the Day and Date are set, push the Stem in all the way and enjoy your Watch!
If you still have the problem with your Watch changing Dates at Noon instead of Midnight, that just means you're on the wrong 12 hr cycle. (It's set for Twelve at Night instead of Twelve at Noon) All you need to do is pull the Stem all the way out, (second notch) and Spin the Minute and Hour hands ahead 12 hours. If it's Twelve O'Clock, spin it ahead until it's Twelve O'Clock again. Doing that will put the Watch on the correct 12 hour cycle.
Granted, you may have to reset your Day and Date again since you just advanced it, but at least you'll be in the correct Time Zone! Happy Spinning!
P.S. Follow Jewelry Secrets on Twitter and Facebook.
Copyright © 02-09-2009 Jewelry-Secrets.com
