NO MORE JEWELRY CLEANER
THROW YOUR JEWELRY CLEANING SOLUTION OUT, YOU DON'T NEED IT!
This post contains affiliate links. If you use these links to buy something I may earn a commission. Thanks! As an Amazon Associate I also earn from qualifying purchases.

SERIOUSLY!
You don’t need to Invest in Jewelry Cleaning Solution EVER again!
The Liquid Recipe that you put in Jewelry Ultrasonic Cleaners is a FARCE, and NOT Necessary!
For you could Spend a lot of Money on Solutions for Nothing!

And there’s no Reason for it!
Really!
Use what the Jewelry Stores USE… For we don’t Buy “Solution” for our Commercial Cleaners.
NOPE!
We use a Home-Made Remedy that Works Ideal on Diamonds, Gold, Silver and Gemstones.
What is this Secret?
MR. CLEAN!
Yep. We Dump in a Little Mr. Clean into the Ultrasonic Tank and That’s IT!
Sometimes we also add in a Squirt of Dish Soap (Like Dawn), but that’s not really Necessary.
It’s Mostly Mr. Clean

Mix 1 Part Mr. Clean, with 7 Parts Water (Hot Water if you can), and that’s what the Pros use.
That will Clean your Jewelry BETTER than any $23 Bottle of Cleaner…
This is What We Do…
We Pour the Mr. Clean in our Tank, Add Water (Remember HOT) and turn it on (Our Tank is Heated, so the Solution gets Really HOT).
But if you just Dump in Hot Water (like Coffee-Hot) to Begin with, then having a “Heated” Tank isn’t needed either.
It’s the Hot Water and Mr. Clean that does the Real Job!
Let It Clean!
Leave your Jewelry in the Tank for 2-20 Minutes (Depending on how Dirty it is), and Be Careful of what Gems you put in the Cleaner as well, for many Gems are Softer and Porous and Can’t take the Heat or Solution (Like Opals, Pearls, Emeralds, Tanzanite – See the Full List HERE!).
Then use a Soft Tooth Brush to Gently Dab at the Metal, Stones, Gaps and Prongs (as well as Underneath the Gems and Diamonds where Dirt Collects the MOST), and your Jewelry will Shine and Sparkle like the Day you Bought them.
So THROW your SOLUTION away!
You Don’t Need it Anymore!
Cheers! :)

















